Diesel Works of Ann Arbor’s Joe McEachern designed a custom two-tank waste vegetable oil fuel system for a imaginative and one-of-a-kind chopper built from an Arctic Fox diesel ATV engine. The bike was designed and fabricated by the Detroit Brothers. Vegpower components were used in the fuel system conversion.

We put Quaker State 5-30 fully synthetic oil in the freezer for two hours and let it chill, we took it out and showed how thick it got compared to room temperature oil…This video in no way promotes or demotes Quaker State motor oil, we only uses this brand because the bottle is clear. poormanmods.com http

WESHIP ALL AMSOIL PRODUCTS NATIONALLY. Please visit the website, learn about the product and place your order. Please send any questions to sales@syntheticoilflorida.com for personal assistance. Thank you for your patronage.

www.lubedealer.com/HiTechOilCo 409000 miles on *one* oil change?! Impossible you say? Then watch this video, as seeing is believing. In this video you’ll see the internal engine parts and what they look like after 409000 miles without an oil change. If you could go this far without changing your oil, would you? Imagine all the money you’d save! Send us a message or contact us via our website for more information on AMSOIL synthetic motor oils.

www.lubedealer.com/HiTechOilCo Part 3 of the 409000 Mile Oil Change video. The most important part of this 3-part video where you’ll hear the comments of the gentleman who owns this truck and how using AMSOIL synthetics have saved him *thousands* of dollars! Contact us at Hi-Tech Oil for wholesale prices on the entire line of AMSOIL products, which in many cases is less than what you’d pay at a discount retail store for a competing brand of synthetic oil. As they say, seeing is believing! Thanks for watching! .

i decided to go with some greasy synthetic 0w40 for the cold weather and got a rust spot patched up kinda fixed up just to stop it from rusting further thanks for watching!

This video will show the installation of the oil cooler, then Intake manifold with the EGR cooler. Then I teardow the turbo and find it worn out.

My Honda XL600, modified with a 400cc air-cooled diesel engine and an automatic transmission. Slow (55mph max) but economical (100-120 miles per gallon). Burns regular diesel, biodiesel or vegetable oil (cut back with a little #2 so it will flow through the filter).

this is part 1 of my engine oil comparison video, this is a cold start on conventional ford motorcraft 15w40 diesel engine oil. temperature at time of start was 26 degrees. next video will be running a cold start on shell rotella t6 5w40 full synthetic to see if there is any difference in performance as far as starting goes.

WE SHIP TO ANYWHERE IN THE UNITED STATES AND CANADA. Please go to our website at syntheticoilflorida.com. Learn about AMSOIL, Read the reviews and see the tests. Then click to order and use the finest engine lubrication in the world. Contact us directly at sales@syntheticoilflorida.com for personal service and answers to all your questions. Thank you for your patronage.

How to do-it-yourself instructional on selecting the correct engine oil. Explains API Service Classifications, Viscosity, Synthetic and Multi-grade oils. Today on Repairs101 I’m going to show you how to choose the right engine oil for your vehicle. Alright, here we go. Today on Repairs101 I thought I’d try and answer the question that I get asked more than any other question – and that is “What kind of oil should I put in my engine?” Now it’s a really good question and it’s really worth looking into. So today I thought I would try and teach you how to decide for yourself what kind of engine oil to put in your engine. Using the wrong motor oil can lead to poor performance, premature wear and ultimately it could lead to failure. Here’s the chart in my Buick Century’s manual. You can see, very similar in the owner’s manual for my Blazer. So the first question you’ve got to ask yourself is “What am I burning? gas or diesel?” big difference between oils designed for gasoline engines and diesel engines. So the API — the American Petroleum Institute is the system that’s in use here in Canada and the US. start off as SA, then SB, SC, SD… the book – service manual – want engine oils labelled by the API. they call this “the API Gasoline Engines Starburst”. Oils made for gasoline engines will have the starburst. this little symbol is called “the API Donut” gives you all the information you need says that it’s API service SL, donut it says that it’s SAE 5W-30 viscosity and …

Davidsfarm new series “Automotive Mythbusters”. Just to teach you some things about cars, vehicle systems,myths and hollywood rumors about cars, also solutions to most everyday Automobile problems or issues.. this weeks subject is Automotive Oils and Lubrication. On this episode we focus on Conventional and Synthetic oils, how-to change your oil, gasoline vs. diesel, engine and transmission oils and often everyday problems that may occur with your engines many oils and lubricants.

I put in some diesel 15×40 oil in my gas motor on accident. It was in a bulk tank marked motor oil at work. I put in a gallon a little at a time when my truck was on add I used that oil. Is there chance it will cause the seals in the engine to leak

Evinrude running clean on Amsoil Saber 100:1 oil. See my ETEC video @ www.youtube.com . For 79 Evinrude rebuild details or product info visit Tech Talk @ www.premiumsyntheticmotoroil.com Go to my website to learn more about Amsoil products and programs. I explain how anyone can purchase Amsoil products at wholesale or become a dealer. In my Tech Forum I’ve been writing about outboards, and autos relative to lubrication along with new products for specific applications. I’ve loaded new articles related to Etec issues relative to oil and recent developments regarding HP Injector oil with the new Evinrudes in my Tech Forum. Protect your investment with Amsoil’s Saber or HP Injector oils. REMEMBER THIS – An oil that meets a specification simply means it can legally be marketed and sold under the TCW3 specification because it meets the minimum requirements…read what those requirements are and I think you’ll be surprised…not hard to achieve and might explain why there is so much low performing oil in the marketplace. Go for a product that exceeds a specification in all categories…Amsoil HPI and Saber Outboard are 2 products that will do that. They will perform over time with minimal wear and minimal deposits…well beyond TC-W3 requirements. Go to my website and review the Amsoil Product Test Results through the online store, and if you have any questions send’em my way.